Replacement of water filter components

Before inserting, the replacement filter must be prepared by soaking (possibly for 8 hours). To replace the filter, follow steps 3 to 5 of the assembly instructions in this instruction manual.

Reassemble the waterfall after replacing the filter (and the pre-filter pads). Fill the filter system with cold water.

  • After the bottom dispenser tank has filled with PiMag water, pull the tap lever outwards until it is in the open position to drain water. Fill the system twice when the tap is open and let the water pass through completely.

The resistance of the filter cartridge may vary depending on use and water quality. It is recommended to replace the mineral stones at least once a year.

Replacement parts/accessories

You can order the following spare parts:

Filter cartridge #13845

Mineral stones #13846

[Total: 1   Average: 5/5]